Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser that works with CAN buses. It's discreet, does not use LED indicators or key fobs and is hidden in the vehicle's wiring.
The user may also turn off the system for a short period of time by using Transport Mode when renting their car. This guide will walk you through the installation process of an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a modern security device that guards your vehicle against hacking, key cloning, and relay attacks. The system connects directly to your car's ECU and is protected by a unique pin code of your choice. It is not detected by thieves using diagnostic scanners or other modern methods. It cannot be disabled by cutting circuits.
The system is simple to use, but professional installation is recommended to ensure a smooth connection to the ECU of your vehicle. Installers who are approved by Thatcham can assist you with the installation and programming of your Ghost system. They can also suggest a tracking or alarm system to complete the security package for your vehicle.
First, the installer must disconnect your battery in order to avoid the possibility of airbag deployment and short circuits. After the battery has been disconnected, the installer may safely begin working. Hand tools are essential for making precise connections and a multimeter may be used to check electrical values and ensure safety. Cable ties and insulation tape are also necessary for securing connections and keeping wiring neat. Lastly, the user manual provides specific guidance specifically tailored to the Ghost Immobiliser model you have.
During the installation process, it's crucial to select the right grounding location that is free of any paint or debris. The installer should ensure that the immobiliser's CAN H and CAN L wires are connected to the appropriate ports on your vehicle's ECU. These wires can be plugged into or soldered depending on the model. A high-quality connector is recommended to ensure a sturdy and secure connection.
Transport Mode can be turned on by the client after the installation is complete. This allows the vehicle to be used by valet parking or mechanics without needing to know the pin code. To accomplish this, the customer has to hit the service button on the dashboard five times in a matter of 2 seconds. After that the system will confirm with 5 indication signals.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's an excellent option for those who regularly rents out their cars on platforms such as Turo. Immobilisers can also lower insurance costs, as it greatly reduces the chance of theft.
Getting Started
It's not difficult to come up with an autowatch immobiliser if you want to protect your car from theft. The device protects your vehicle from being started even if a criminal steals or copies the key. It's possible because of its advanced technology that prevents the engine from starting until the correct PIN code is entered.
The device works by connecting to the CAN bus network in your vehicle, allowing it to communicate with the ECU directly. It uses buttons that are already present on the dashboard and wheel to create a unique sequence that only you can identify, making it impossible for anyone else to start your vehicle. This is the most secure way to safeguard your pride and joy. It will keep its value intact should you ever decide to sell it.
Installing Ghost's immobiliser is straightforward however, you must follow the instructions to avoid electrical problems and malfunctions in the system. First, you need to locate and determine a constant 12V power source and an adequate grounding point on the chassis of your vehicle. Then, you can begin connecting the wires to the immobiliser. Be sure to use high-quality connectors and soldering methods to ensure a secure connection. Insulate the connections using heat shrink tubing, insulation tape or other materials to avoid short circuits in electrical power.
After the wires have been connected, you are able to reconnect the battery and turn on the engine to test the function of the immobiliser. When everything is functioning correctly, you can install it in a safe location under the dash or somewhere else in the vehicle. Be sure to cover it in a secure manner to prevent a thief from tampering with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified This means it meets the highest standards of security and is an excellent protection against car thieves. It is a superior defense against key cloning, hacking and relay attacks. It can't be disabled without knowing the code. The device is simple to use, and it can be set to an option for a service valet so that your vehicle won't be activated when you take it to an MOT or for servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system that's designed to stop theft of vehicles. It connects directly to your vehicle's CAN bus network and communicates with the ECU and ECU, making it virtually undetectable as an addition to your car. Ghost Immobiliser doesn't interfere with the factory settings of your vehicle, unlike other aftermarket systems that require the removal of circuit elements.
It's also undetectable to thieves using diagnostic scanners. The system doesn't transmit or receive radio frequency signals, but instead uses CAN data for communication with your ECU. Furthermore, it doesn't require any modifications to your vehicle's existing key fobs.
To use the Ghost Immobiliser, simply switch on the ignition in your car and enter your sequence for disarming (either one or two buttons). The indicator will flash twice to confirm that you have entered the correct code. After this, you can start your vehicle and drive off in peace.
Once installed, the Ghost Immobiliser safeguards your vehicle against hacking or key cloning, while protecting its value. In Transport Mode you can temporarily disable the Ghost Immobiliser when you need to give your car to service or valet park.
You'll need a constant power source (12V) and an earthing point to complete the installation of a Ghost immobiliser. Make sure that both are well-insulated and can be touched. Cable ties are also recommended to secure the wires. This will reduce the possibility of theft by potential thieves. To avoid making mistakes, double-check these points and mark them with a label or tape. Check all connections for signs that they're wearing out. Make sure that all connections are securely in place, and properly insulated. Don't forget to test the Ghost Immobiliser after installation is completed. This will make sure that the unit is operating correctly and that all connections and insulation are secure. If you encounter any issues, make sure to address them immediately.
Testing
The Autowatch Ghost Immobiliser is an innovative vehicle security system that is integrated into your car's ECU to block the engine from starting without authorization. Its innovative technology safeguards your vehicle from hacking and key cloning and other common methods used by thieves to steal vehicles. The Ghost works in conjunction with existing alarm and tracking systems to provide the most effective security for your vehicle. The Ghost's unparalleled features and discreet design make it a popular option for car enthusiasts and security-conscious drivers too.
To ensure proper integration of the Ghost Immobiliser, you must to follow every step of the installation procedure. Consult the wiring diagram of the vehicle to assist you in locating and connecting the wires. You'll then need to identify the power and grounding sources. Once you've identified these, you'll be required to mark them so that they are easy to locate during the installation process. It's important to use high-quality materials and tools. Basic hand tools will assist you in making precise connections. A multimeter will check electrical values and guarantee safety. Cable ties and insulation tape will help keep all connections neat and tidy. Additionally, a user's manual will give specific guidelines specific to your Ghost model.
It is crucial to test the system prior installing it. Enter the PIN code into the system and start the vehicle. This step will confirm the immobiliser is working as it should and stop unauthorised vehicle starts. It is recommended to complete this procedure regularly as part of your routine inspections of the vehicle to ensure the system is operating correctly.
After the installation is completed, you can begin driving your car with confidence. The Ghost will safeguard your car from thieves who might steal your car. It will ensure that no one can take your car away without having the correct PIN code. The Ghost can also be used with a Thatcham-approved tracker to identify any attempts at tampering or theft, allowing you to locate your vehicle if it is stolen.
The Ghost is compatible with a variety of automobiles, including those from the majority of major manufacturers. If you are interested in securing your car using this advanced device, call Monty's Locksmith today to find out more about our installation and maintenance options. We are a TASSA Installer who is registered This certification ensures that we adhere to the strictest guidelines and procedures for installing our products. similar webpage assures insurance companies, customers and law enforcement officials that all installations are completed safely and in a correct manner.