Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser for CAN buses. It's discrete, doesn't employ keys or LEDs and is hidden within the wiring of the vehicle.
The user can also disable the system temporarily using Transport Mode when renting their car. This guide will guide you through the installation process of the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a cutting-edge security device that protects your vehicle from hacking, key cloning, and relay attacks. The system is linked directly to the ECU of your vehicle and protected by a pin code that you choose. It is undetectable by thieves using diagnostic scanners or other advanced methods. It is not able to be disabled by cutting circuits.
The system is simple to use, however professional installation is recommended to ensure a clean connection with the ECU of your vehicle. A Thatcham-approved installer can help with the installation and programming of your Ghost system. They can also suggest a tracking or alarm system to complete the security package for your vehicle.
To avoid an accidental deployment of short circuits or airbags To avoid an accidental deployment of airbags or short circuits, the installer must disconnect your battery. Once the battery is disconnected, the installer may start working safely. Basic hand tools can be used for precise connections. A multimeter can be used to verify electrical values. Cable tie and insulation tape are crucial to ensure connections are secure and keep wiring tidy. The Ghost Immobiliser user manual will provide specific instructions specifically tailored to your specific model.
It is essential to choose a grounding location that is free of any paint or debris during installation. Installers should also ensure that the immobiliser's wires, CAN H and CAN L are connected to the proper ECU ports. Based on the model, these wires may need to be soldered or plugged into. To ensure a secure and long-lasting connection it is recommended you choose a top-quality plug.
Once the installation is complete Once the installation is completed, the customer can enable after the installation is complete, the customer can activate Transport Mode. This permits mechanics or valet parking to access the vehicle without knowing the pin code. The user must press the icon for service on the dashboard five times in two seconds. After this is done the system will verify by displaying 5 signals.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's an excellent choice for those who rent out their vehicles regularly on platforms like Turo. Having an immobiliser can also lower insurance costs, as it significantly decreases the risk of theft.
Getting Started
If you're looking for a solution that will secure your vehicle from thieves, you can't go wrong with an autowatch ghost immobiliser. It prevents your car from starting even if someone steals or copies your key. This is due to its sophisticated technology, which is designed to prevent the engine from starting until the correct PIN code is entered.
The device connects to the CAN bus network of your vehicle, allowing it to communicate with the ECU directly. It uses the buttons on your dashboard and steering to create a unique sequence, that only you can understand. This makes it impossible for anyone else to start your car. This is the ultimate system to protect your pride and joy. It will ensure that your car's value remains intact should you ever decide to sell it.
Installing a Ghost immobiliser is easy however, you must follow the directions to avoid electrical issues and malfunctions in the system. First, you must find a 12V power source and a suitable grounding for the car's chassis. After that, you are able to begin connecting the wires that will be used to activate the immobiliser. Make use of high-quality connectors and soldering methods to create an effective connection. Make sure to shield the connections with heat shrink tubing, insulation tape or other materials to avoid electrical short circuits.
After the wires have been connected, you can reconnect the battery and turn on the engine to test the immobiliser's functionality. Once everything is working properly then you can put it in a safe location beneath the dash or anywhere else in the vehicle. Be sure to hide it well to ensure that thieves cannot get it into a compromising position.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association), which means it is a top-quality deterrent to car thieves. It is resistant to key cloning and hacking and cannot be disabled without a code. The device is also simple to use and is able to be put into an auto valet mode so that your car isn't activated if you bring it in for servicing or an MOT.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to prevent vehicle theft. It communicates with your vehicle's ECU and connects directly to the CAN bus. Unlike other aftermarket systems that require the removal of circuit components the Ghost Immobiliser won't interfere with the factory settings for your vehicle.
It's also undetectable to thieves using diagnostic scanning devices. This is because the system doesn't transmit and receive radio frequency signals and it relies on the CAN data to communicate with your ECU. It doesn't require any modifications to your current key fobs.
To use the Ghost Immobiliser, simply turn on your car's ignition and enter your sequence for disarming (either one or two buttons). The indicator will flash twice to verify that you've entered the correct code. After that, you are able to start your vehicle and leave safely.
Once installed, the Ghost Immobiliser protects your car against key cloning or hacking while preserving its value. If you ever have to surrender your vehicle to a valet or service provider The Ghost Immobiliser will be temporarily disabled in Transport Mode.
You'll need a constant power source (12V) as well as a grounding source to complete the installation of a Ghost immobiliser. Make sure that both are well-insulated and can be touched. It is also recommended to use cable tie to secure and bundle the wires. This will reduce the risk of tampering by potential thieves. To avoid mistakes, make sure to double-check these points and mark them with labels or tape. It's important to check all connections for signs of wear and tear. Make sure all connections are in place, and are properly protected. Don't forget to test your Ghost Immobiliser once the installation is completed. This will make sure that the unit is functioning correctly and that all connections are safe and well-insulated. Be sure to correct any issues as soon as they arise.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that works seamlessly with your vehicle's ECU in order to prevent unauthorised motor starting. The innovative technology protects your vehicle from key cloning and hacking as well as other common methods employed by thieves to steal vehicles. The Ghost is a perfect complement to existing alarm and tracking systems to provide the best protection for your vehicle. This system's unmatched features and discreet design make it a preferred choice for car enthusiasts and security-conscious drivers too.
It is essential to follow the procedures for installation to ensure correct integration of the Ghost Immobiliser. try what she says to start is to look over the vehicle's wiring diagram that serves as a roadmap for locating and connecting the wires required. You'll then need to identify the grounding and power sources. Once you have located them, you'll need to mark the points to make them easy to locate when installing. It's important to use high-quality materials and tools. Basic hand tools will help you make precise connections. A multimeter can verify electrical values, and ensure safety. Cable tie and insulation tape will ensure that all connections are tidy. Also, a user's guide will provide specific instructions specifically tailored to your Ghost model.
Before you begin installing it is essential to test the system by entering the PIN code and starting the vehicle. This will ensure that the immobiliser works according to plan, and prevents unauthorised vehicle start-ups. This step should be done regularly as part your regular inspections of the vehicle to ensure the system is always functioning properly.
Once the installation has been completed, you can begin driving your car with confidence. The Ghost will keep your car and its contents safe from would-be thieves, ensuring that nobody can drive off with your vehicle without the correct PIN code. The Ghost can also be linked with a tracker approved by Thatcham to detect any attempts to steal or tamper that could lead to the location of your vehicle if it's stolen.
The Ghost can be used on a variety of vehicles and is compatible with all major brands. Monty's Locksmith can help you secure your vehicle using this cutting-edge device. Contact us today to learn more about our service and installation options. We are a TASSA Registered installer This certification ensures that we adhere to strict standards and procedures for installing our products. This assures customers, insurance companies, and law enforcement agencies that installations are done safely and properly.